An inflatable bag used to fill empty space on a load of product to keep the product from shifting.
Inventory that is reserved for a specific order, customer, promotional event or other purpose and is not to be used for standard order fulfillment purposes. Once allocated, this stock is no longer available as usable inventory for new orders. A sophisticated WMS (Warehouse Management System) will offer a variety of ways to indicate a reserved or on hold status for specified inventory.
Inventory is allocated to a specific order.
A method of billing where the client is billed for one month of storage once inventory is received. If this product remains in inventory, it will be billed an additional monthly charge each month on the anniversary of its arrival.
Physical count of all products in the warehouse done on a yearly basis.
The area outside the dock door which is used by delivery vehicles to park or position for loading and unloading. The Apron is specifically designed to a depth that will allow trailer floors to fit with the warehouse floor in a way that facilitates loading and unloading.
Location in the warehouse where products and loads are collected and combined.
The amount of shippable product in the warehouse; does not include product designated as damaged, on hold, or pending shipment.
A UPC code that identifies product. It consists of a series of black bars and is scannable. The bar code represents an identification number that is stored in the computer system along with other information about the product.
When an outbound shipment is delivered, instead of coming back empty, a load is picked up from a destination close to the final stop-off and then delivered either back to the warehouse or a Consignee location near the warehouse. A Back Haul creates revenue as opposed to coming back empty which would be an expense.
A type of plastic or metal strapping that helps support a load and hold it together. Can be used to strap and secure product on a pallet or skid.
A picking method whereby one SKU is picked one time for all applicable orders and then distributed across multiple orders in a staging or packing location.
An area in the warehouse designated by markings on the columns or floor.
Use of the bay for storage.
Inventory level and count at the beginning of a period.
Bill of Lading
The Bill of Lading (BOL) is an official document that accompanies every shipment. It serves as the contract between the party that owns the freight and the carrier. The each driver prior to vehicle departure. When a driver for an outside carrier signs the Bill of Lading, he/she accepts responsibility for the shipment. Upon arrival at the destination, the consignee or customer signs the Bill of Lading to indicate that the shipment was received and all goods are present as itemized. This customer-signed Bill of Lading then serves as a Proof of Delivery (POD) document.
A four-sided structure that is mounted on a pallet. A bin may or may not have a cover. Or, an area in the warehouse used for storage of inventory that is being staged or at rest.
Blind counts are used during physical inventories to prevent counter bias. The location and item code are provided to the counter, but the counter must provide the quantity of the item found in the given location without knowledge of the desired quantity according to the WMS (Warehouse Management System) or inventory records.
A bonded warehouse is one that has been approved by the U.S. Treasury Department who, due to observance of revenue laws, has put the warehouse under bond or guarantee. A bonded warehouse can also be a warehouse utilized for the storage of merchandise that is on hold until duty is paid.
Traffic or congestion in an area of the warehouse due to poor planning or insufficient resources.
Sheet of plastic with air bubbles that is used as a packing material.
A movable rail car partition that is used to secure a load.
Storage of large quantities of product in shipping containers. May also be the storage of product that is not packed (loose).
Material Handling Equipment designed to bring product to picker so that the picker can remain stationed in a designated picking location without traveling. Ideally, order information is loaded or automatically transferred into the carousel system, and multiple orders are picked by multiple pickers at one time. Types of carousels include horizontal and vertical.
The carrier transports goods from the client to the consignee. The carrier can be a transportation company, or the railroad. Responsibilities include carrying the goods safely, in good condition and in a timely manner.
A unit of product, a protective casing around a product.
A frame with wheels that supports a container that is being transported over land.
To use a wood or metal wedge to block the wheels of a truck while it is being loaded or unloaded.
An attachment to a forklift that allows it to encircle and grasp product.
The height pallets can be stacked while leaving clearance for product movement or for lights, sprinklers, etc., hanging from a ceiling.
The stock that arrives at our Distribution Centers is owned by the client, the companies that have made arrangements to store and distribute their products.
Product identified with specific clients (i.e. paper).
Damage to product that is not obvious until the product is examined or the condition becomes apparent during storage or transfer.
The client’s customers are referred to as the consignee.
Inventory that is in the possession of the customer, but is still owned by the supplier. Consignment inventory is used as a marketing tool to make it easier for a customer to stock a specific supplier’s inventory. Read my article on Consignment Inventory.
Combine two or more shipments going in the same direction or to the same destination on a single trailer.
A container is a box that is used to transport product, and is widely used for international shipments. Marine containers or intermodal containers can travel on ocean liners, railroads, and on truck frames (chassis).
A warehouse operation managed by a third party logistics (3PL) provider for a specified period of time. The 3PL manages a client’s inventory and order fulfillment processes. Pricing scenarios may vary, and storage, labor and equipment resources are typically dedicated to the client for the duration of the contract. The client may or may not share in the building and equipment expense.
Product or orders that are brought into the warehouse but not put-away. Instead of the stock arriving and being placed into storage, the stock is temporarily stored at the dock to be delivered or goes out immediately on another vehicle to be shipped. This stock is usually shipped immediately or within a day and does not go into storage.
Allowing employees to have experience in multiple tasks, job functions, or across multiple accounts in order to increase productivity and provide backup.
Space utilized versus space available.
Load that is picked up at the warehouse by the customer (usually within the same day the order is placed).
The physical counting of portions of inventory on an on-going basis. After a period of time all products have been counted. A cycle is then defined as the time it takes to count all inventory once.
A label that shows when a product was manufactured.
Abbreviation for Distribution Center. A warehouse that manages and distributes inventory per the direction of corporate systems and customer demand.
Product that has been in inventory for an extended period of time without being moved or ordered.
Product is stored more than one unit deep in an aisle.
Distribution Centers are warehouse facilities that store, manage, and ship inventory on behalf of its clients. Inbound carriers bring product into the Distribution Center. Product can be immediately allocated to existing orders, or it can be placed into storage for the purpose of filling future orders. Outbound carriers transport stock from the Distribution Center to the end user. Distribution Centers are strategically placed close to major transportation lanes (i.e. highways, railroads).
A warehouse door with an extending platform where trailers are loaded and unloaded.
Outer wall of dock door.
A plate at the dock door entrance that raised and lowered either manually or hydraulically to accommodate trailer floor heights.
A light used to illuminate the inside of a trailer in order to aid in the loading and unloading processes.
A moveable metal plate that is placed between the warehouse dock door and a trailer or railcar and makes it easier/smoother to access a trailer or railcar with a forklift or similar equipment.
Double-Deep Storage Lane
Method of storing product two loads deep in an aisle.
A container or piggyback is moved from a rail yard to another location and then returning that piggyback / container back to the initial pick-up point, is known as a dray. It is important that these containers get unloaded quickly and returned back to the original point so not to incur detention charges.
Storage racking equipment that has side rails to enable warehouse operators to stack product high in deep rows. It provides access only from aisles.
Storage racking equipment with side rails to enable warehouse operators to stack product high in deep rows. Unlike Drive-In Rack, Drive-Through Rack allows access from either end of the row, as opposed to only being accessible from the aisle.
Refers to packing materials such as cardboard, empty pallets, air bags, air pillows, packing peanuts, or other materials utilized to protect freight.
EDI (Electronic Data Interchange)
Electronic Data Interchange refers to a computerized exchange of information with the client through the warehouse management system. It is a method of exchanging orders, invoices, shipping forms and other documents over the computer. By eliminating the clerical, mailing and other costs associated with paper-based information, EDI reduces costs, time delays and errors.
Also known as an expedited order, this order is placed and processed to be picked and shipped in an expedited manner.
Inventory levels at the end of a specified period.
ERP (Enterprise Resource Planning)
Refers to a wide range of activities supported by software with multiple modules (accounting, purchasing, inventory, manufacturing, etc.). Manufacturers and other businesses utilize ERP systems to manage various aspects of their businesses, including: product planning, parts purchasing, inventory management, supplier management, customer service management, and order tracking. A relational database system may be a necessary component for the effective use of an ERP system. Implementation of an ERP system can involve considerable business process analysis, user training, and a significant financial investment.
ESFR (Early Suppression, Fast Response)
Ceiling-mounted sprinkler systems that started being used in warehouses around 1990 as an alternative to rack-mounted sprinkler systems. ESFR heads detect fire faster and are reported to start spraying with more speed than conventional sprinkler heads. They also output water at higher volumes (approximately 100 gallons per minute). Droplet size is typically bigger which delivers more water, with greater speed, to the fire source. ESFR systems reportedly extinguish fires faster and more effectively with less damage to product than in-rack systems.
Date when merchandise is no longer able to be shipped.
The physical warehouse or plant where storage takes place.
FIFO (First In, First Out)
Inventory allocation method whereby the first product stored is the first product that is utilized or allocated for the fulfillment of orders.
First-in, last-out system of inventory.
Finished Goods Inventory
Products that are ready to ship.
Finished Product Inventory
Available products to ship to customers.
Refers to product stacked directly onto the floor of a trailer without pallets or slip sheets; product must be unloaded manually without the use of a forklift.
Racking equipment that allows for the product to be stocked in through one side and removed for order fulfillment purposes from the other side. Product stored in Flow Rack is naturally allocated via FIFO based on the racking equipment design.
A warehouse vehicle, also called a lift truck, which is used for lifting and transporting pallets of product. A forklift may have a special attachment on the front for specialized handling of product.
Lift-truck attachment used to move stock on pallets.
An invoice for transportation charges generated when a load is delivered.
Compensation paid by the client for transportation services performed.
This is the compensation paid to the contracted carrier for the transportation services performed.
The picking and processing of orders for shipping from a distribution or warehouse.
This term refers to a shipment comprising a full or almost full load on a truck. A full or almost full load is considered to be 39,000 – 44,000 pounds.
Large corrugated carton that has the same length and width as a pallet. Gaylord’s are usually used to protect loose parts in bulk and are frequently used in manufacturing.
Type of conveyor that uses gravity to move materials. Skatewheel conveyer and roller conveyor are the most common types of gravity conveyor used, however, even a simple steel chute is essentially a gravity conveyor.
The total weight without deduction for tare (includes packaging and container).
The labor involved in moving product received from the trailer into the warehouse dock and then into the storage location on the “IN” and moving the product out of the storage location and into a staging location to then be loaded onto a trailer on the “OUT”. The Warehouse Forklift / Clamp Operator moves product IN and OUT. If additional handling is involved such as opening on days off, pick packing etc., that are not the normal handling as defined in the warehouse contract, these would be defined as additional accessorial charges for handling.
Charge for normal warehouse handling (inbound or outbound, or both) to customer.
Cost to warehouse or 3PL for all handling operations.
Western hand truck is a device used to transport goods manually with wheels within the side rails. The Eastern hand-truck is similar except the wheels are outside the side rails.
Short for “hazardous material.” Material is deemed hazardous by the government or a carrier. HazMat may require special handling or special facilities. Not all warehouses or carriers will handle HazMat.
AKA Forklift. References the ability of the truck to lift and put down freight.
The situation that occurs when a lot (see Lot) is partially depleted and the remaining space is wasted because it cannot be utilized.
Keeping the warehouse presentable, organized, and safe for all parties.
Damage to product that occurred while in the warehouse (i.e. water leak, dropped product, etc.).
Intermodal means using 2 or more, modes of transportation: rail, truck or ship. The stock can move over sea by ship, over land by rail and then, at the main rail switch, the container is removed and put on truck chassis. The stock is then carried by truck to our Distribution Centers.
Warehouse storage charge for the month when product is received; it is typically billed when product is received.
Also known as “dunnage,” includes materials such as foam, paper, or wood used to minimize movement within the container.
The number of times inventory turns is calculated using the following method:
- Sum the Inventory In and the Inventory Out, and then divide by 2 to arrive at the Throughput.
- The number of Inventory Turns is equal to the Throughput divided by the Average Inventory.
An inventory system that aims to coordinate the arrival of materials or supplies at a facility at the moment that they are needed in an effort to reduce storage and holding costs.
Assembly of product or parts within the warehouse.
Some clients require inventory or shipment labels to be attached to packaging (i.e. box, case, pallet, etc.). Many labels contain bar-coded information, to allow scanning devices to quickly and automatically transfer the information into inventory systems. In some cases, labels are pre-printed and pre-affixed by the manufacturer. In other cases, labels must be created and applied by the Distribution Center prior to shipment of the product in accordance with retailer or customer requirements.
Design and set-up of warehouse storage.
Less Than Container Load (LCL)
Shipments weighing less than required for the application of a full container rate. When the shipment is less than a full container load, the freight may be calculated as an LCL shipment.
Less Than Truckload (LTL)
Shipments weighing less than required for the application of a truckload rate. A typical full truckload shipment is 39,000 – 44,000 pounds. Weight breaks may vary across LTL classifications and in some instances it is less expensive to apply a full truckload rate even thought the shipment size may be less than 39,000 – 44,000 pounds.
A dock plate that adjusts to the height of a trailer.
License Plate Number
Otherwise known as an “LPN,” this is a number used to identify products and containers.
LIFO (Last In, First Out)
Inventory allocation method that selects newest inventory first.
A vehicle that is utilized to move and transfer product/freight in a distribution center, warehouse, terminal, manufacturing site, or dock. Often referred to as a forklift.
Slanted rack that allows for easier picking. Items are put into the high end of the rack and then picked from the low end. Desirable for FIFO picking procedures.
The product that is picked and loaded onto a truck and transported to a consignee.
Each product has a specific location in the warehouse.
Routine audit of location records to ensure that records are compatible with actual placement of product within the warehouse.
Locator systems allow for more effective inventory-tracking. Product can be stored in a way that makes sense for the warehouse, such as high demand product in more accessible locations. Locator systems assist in better accuracy with inventory tracking and control as well because it is all computerized.
The processes and services associated with planning and implementing flow of storage and shipments in a 3rd Party operation required to meet the customers’ needs in an efficient manner.
Product remainder in a specific location or layer.
A group of product with the same run or manufacturing date.
Identification number assigned to specific product for tracking purposes that is usually tied to a date or a production run.
Lot Number Traceability
The ability to trace items through their lot number. This is helpful when a specific product is needed or information about a specific product is required.
Transportation term that describes shipments that are less than a trailer load. LTL also is used to describe the carriers that handle these loads. LTL carriers generally use strategically placed hubs to sort and consolidate LTL shipments into full-truck-load shipments.
A contracted worker who assists in the loading and unloading process.
A document that lists all of the products being transported; used when loads are combined.
A loading Manifest will be printed to the Warehouse so that they know who will be picking up the load and how to properly load the trailer. A Driver Manifest will be auto-faxed to the carrier so that they know the order of the stop(s), the address and shipping requirements of the client(s).
A large carton that is used to hold and protect smaller cartons or packages of product. Using a master carton reduces handling as one larger piece instead of multiple small pieces.
A carton containing a specific number of product or multiple case quantities.
The services and processes the warehouse must utilize to move, store and otherwise handle materials.
Lift trucks that raise the operator as well as the load. Two types of man-up lift trucks are turret trucks and order selectors.
Motorized Pallet Truck
There are two different types of motorized pallet trucks, the “Walkie” and the “Rider.” The “Walkie” is built so that the operator can walk alongside it. The “Rider” is built so that the operator can stand and ride on the truck.
Narrow Aisle (NA)
Specialized lift trucks designed to be used in narrow aisles of 8 to 10 feet.
Net Storage Area
Space in the warehouse (in square feet or meters) that is actually used for storage. This does not include aisles, docks, offices and staging areas.
Product weight before being packed with materials or packaging. The total weight of the product with deduction for tare or packaging. For example, the net weight on a roll is the total weight of the roll less the fiber core and wrap.
Stock that has no useable purpose that remains in the warehouse.
The amount of product in the warehouse. The product may be designated as shippable, damaged, on hold, or pending shipment (allocated to an order).
Refers to product that is designated as unable to be shipped; may be product with damage, questionable quality, expired shelf life, etc.
A directive, sent by the owner of the goods, to ship product out of the warehouse. An order specifies product, quantity, shipping date, and destination and may contain special instructions.
The cost of labor, time, and other activities needed in an instance that a product is ordered.
Based on demand and frequency for orders of specific product, the order cycle is a replenishment cycle that determines how often a product needs to sent as an inbound to the warehouse in order to keep up with demand.
Also known as an order picker, an order selector is a specialized lift truck that allows a person to ride on it with the pallet in order to pick from various locations and levels.
O.S. & D
Over, Short and Damage; it refers to the condition of a load of product which arrives in a defective condition, or whose quantity does not match the bill of lading (cases over or short).
Occupational Safety & Health Administration, a branch of the US Department of Labor.
When more has shipped on a load than was intended or was indicated on the BOL.
Over the Road Carrier
A truck or trailer used in hauling freight by road to destinations outside a 70 mile radius of a facility.
The packing list is created in the Distribution Center. The packing list identifies the quantity and weight of each product on the order and each individual item # (unit ID, serial number, etc.) if applicable. It is a comprehensive list identifying exactly what is being shipped on the order.
Describes how a product is packaged such as “20 cartons per pallet” or “6 units per carton”.
A wooden or plastic base upon which layers of product are stacked for storage and transporting with a forklift or pallet jack.
The bar code tag that is placed on a pallet for tracking purposes.
A machine that aids in the transfer of product from one pallet to another. The pallet inverter flips over the pallets and product in order to put the product on the new pallet and take off the old.
To put materials and product onto a pallet.
Material handling equipment consisting of pallet forks on small wheels that is used in the warehouse to move cases of product. It may be a motorized unit guided by an operator who stands on a platform; or it may be a motorized or manual unit guided by an operator who is walking behind or beside it.
Refers to the bar code sticker placed on a pallet of product.
Designed specifically for the handling of large paper rolls, the paper roll clamp is a lift truck attachment that clamps around the roll and also allows for a full 360 degree rotation.
Less than a full pallet of product.
Perpetual Inventory System
A continuous inventory tracking method where inventory taken out is recorded with each outbound order and new inventory is recorded with each inbound order.
A physical count of everything in the warehouse.
Refers to the process of counting all inventory in a warehouse or plant. Operations are usually shut down during a physical inventory.
A warehouse operation that involves picking individual items from cases and putting them together a carton or pack for shipment.
The person in charge of picking specific stock for orders.
Picking is the movement of stock from a storage area to a staging area. The Fork Lift / Clamp Operator will “pick” the stock which is assigned to a particular order. The Fork Lift / Clamp Operator must pay close attention and match the items listed on the Pick Ticket to the information on the product.
The Pick Ticket is a document used by the Forklift / Clamp Operator or picker in the Distribution Center who will be locating the stock for the order. The Pick Ticket contains information such as, product location, quantity, lot numbers, serial numbers or unit numbers.
The time it takes to pick and document specific stock for an order.
Location in warehouse where dedicated stock is stored. Also known as a primary location.
Warehouse picks from locations with the least amount of product on hand in order to clear the area.
Used in high volume piece picking, technique where pickers are directed to product by lights.
The process of transporting a trailer on a railroad flatbed; the trailer is then hauled to its final destination by truck.
A type of trailer that can be transported on a rail car and also pulled by truck.
Plugging is a method of switching direction, stopping, or slowing down without using a break on electric industrial vehicles.
Proof of Delivery; a signed bill of lading.
A combination of less than truckload (LTL) freight built to form a full or almost full truckload. By “sharing” space in a vehicle, the client and the carrier can minimize cost.
Warehouse that is operated by the owner of what is being stored inside of it.
A series of characters assigned by the manufacturer to identify each of its products. This is usually the SKU.
A number assigned to a shipment by the carrier for tracking purposes.
A rack system that pushes stored product up an inclined ramp in order to provide for deep pallet storage.
Device used with conveyer systems, a push sorter moves product on the conveyer using a stationary device with an arm that can push and sort.
Similar to pick-to-light. Lights are used to guide which container the picked item is to be put into.
A business that provides the use of space for storage to a variety of clients. This space can be leased for varying amounts of time determined by the contract set by both parties.
Movement of stock from the time it is unloaded to the time it is put in its final location.
Quality Assurance, Quality Control
The inspection of product as it comes in or goes out of the warehouse in order to ensure quality.
Amount of time before set-up or processing of a job.
Metal framework in the warehouse used to store products several levels high.
Radio Frequency (RF).
A data system made up of devices that use RF to transmit information into a host system from different locations or from “on the job.”
Inclined area that connects to the warehouse to facilitate easier movement in and out of the warehouse by trucks and other equipment.
Random Location Storage
A storage method where product is stored randomly. A benefit of random storage is that it allows more productive utilization of space, however, using this strategy may decrease accuracy as like product is not necessarily together.
A schedule of warehouse or transportation charges for a client.
Retail Distribution Center which replenishes to stores.
The reach truck is a narrow-aisle (8”-10”) lift truck specially designed for racked pallet storage. It is also known as a stand-up reach, straddle reach, or double-deep reach. The reach truck is designed with outriggers in front and telescoping forks controlled by a hydraulic mechanism. This mechanism allows you to pick up the load and pull it back over the outriggers in order to reduce the overall truck and load length. It is helpful for turning down a narrow aisle. The reach truck has a mechanism that allows for extended reach in order to store pallets two-deep in a double deep rack.
Information is updated and saved instantaneously.
A record of the condition of all inbound stock as it arrives.
A list of all the inbounds received in an effort to ensure accuracy.
An amount charged to a client for monthly storage; it is based on the amount of product stored in the warehouse on the first day of the month or specified by the contract.
Temperature controlled warehouse that serves well for storage of food and other perishable products.
Authorization to ship.
Inventory reaches a specific point based on demand where it is set for replenishment.
Packaging material differently than how it arrived. Example: making a pallet of 60 cartons into 3 pallets of 20 cartons.
Refilling of a picking location.
Permission given to a carrier or consignee to return product.
Return Authorization Number
This is usually a number supplied by the client authorizing the return of product from a consignee.
The logistics needed to plan return of product or a load. This may include a return order, transportation, and put-away.
Radio Frequency scanning and transmission of data.
A hand-held radio frequency terminal with a screen, a keypad, and a scanner that is used by warehouse personnel to scan pallet tags and location tags.
RFID, Radio Frequency Identification
An alternative to barcodes, an RFID is a device on an object used to transmit data to an RFID receiver. RFIDs vary in size depending on the object and hold more data than the standard barcode. They are also advantageous because the data stored on the RFID can be easily changed as they do not require line-of-site in order to transfer this data.
A conveyer that uses rollers to move product either by gravity or automation.
Used to ensure availability of stock in case of deviations in supply or demand. These are calculated by using past deviations. To determine the optimal safety stock level, a required service level multiplier is needed.
Standard Carrier Alpha Code; a unique 2 to 4 letter code assigned to transportation companies for identification purposes. SCAC codes are required for EDI, and are printed on bills of lading and other transportation documents.
There are a limited number of docks / doors where outbound vehicles can be loaded and inbound vehicles unloaded. There also may be limited people and equipment to handle these tasks. Consequently, resources (people and equipment) and vehicle traffic must be managed to avoid bottlenecks and inactivity.
Number assigned to a single item in order to identify and differentiate it from others.
Freight that is transported from one location, such as a regional distribution center (RDC) or manufacturing site, to another, such as a consignee.
Delivery address for the consignee.
Reduction in inventory measurement (often referred to as a result of loss or theft).
A load transported from one customer-related facility to another; does not include product shipped to a consignee.
Conveyer that moves product using wheels.
Stock Keeping Unit; a product code assigned by the owner of the goods.
SKU (Stock Keeping Unit)
A number (product code) assigned to a single item or items by the manufacturer.
A sheet of cardboard on which product is stacked; used instead of a pallet.
Slip Sheet Attachment
An attachment to the front end of a forklift that is used to handle product on a slip sheet.
Approach used to determine the best placement and locations for products in the warehouse depending on its dimensions and how often the item is picked.
Initial allocation of inventory to an order which will commit the inventory to the order but not specifically pull it from a certain lot.
Split Month Billing
Split month billing is a variation on monthly billing. The client is charged:
A “regular” rate for inbound storage in the first half of the month, and a “reduced” rate (i.e., 50% discount) for inbound storage with a receipt date after the 15th of the month. This billing option can address client resistance to monthly billing (having to pay for a whole month’s storage for inbound stock that arrives later in the month).
A partial shipment where the remainder of the order is on backorder and the warehouse cannot fulfill the entire request.
To place a trailer in a designated location or warehouse door.
Inspecting a sampling of containers in a shipment to determine if the quality of the entire shipment.
A driver who moves trailers in and out of dock doors.
A specialized tractor used only to move trailers around the warehouse facility and place them at doors where they can be loaded or unloaded.
The number of pallets rolls & skids that can be safely stacked on top of each other; the client supplies this information.
Placing stock on top of other merchandise in order to more efficiently use space.
The process of getting product from its storage area and placing it near the loading area for later shipment; or in cross docking, the process of unloading product and organizing it for immediate shipment.
A designated area of the warehouse near the loading dock where product is placed or arranged for shipment.
Stencils are markings placed on the product with the ID information required by the customer for the product that they are receiving. This can be in different forms dependent on the specifics for the customer. It can be a label or just a chalk inscription with the product ID.
Clear plastic film that is wrapped around a pallet of product to secure it.
When the “computer looks for and allocates stock,” it checks to see if it is available. Available stock can be used to fill the orders. When an order is input, the system will automatically look for available stock and allocate the stock to the particular order.
Way of prolonging shelf-life by moving or replacing product in a warehouse.
Charge to client for holding stock that has not moved.
Charge to client for all storage costs, usually on a month-to-month basis.
Product is loaded onto a pallet and then secured with strapping.
Used for securing goods onto a pallet. Can be metal or plastic.
A way to recognize a shipment or particular item.
A count performed when shipments are received in order to track and record their condition.
The weight of the wrapping holding the goods. For rolls, the tare consists of fiber core and the wrap. For pallets, the tare consists of the pallet and the wrap. The tare is the difference between the net weight and gross weight.
Break points for carriers to strategically reload freight for delivery to the final destination.
Third Party Warehouse
Warehouse operated by a 3PL Company that houses the products of their clients.
Method of calculating average product movement.
Units per Layer
An enclosed vehicle, towed by a truck, which is used for transporting product. There are a few different types of trailers. These include tractor trailers, semi-trailers, flat beds and reefers (refrigerated trailers). Most trailers are 45’, 48’, or 53’ long.
The truck that pulls a trailer.
A group of data elements that represent the information on a business document like a shipment order, and which are transmitted through EDI.
TMS, Transportation Management System
System used by the transportation department which aids in such tasks as manifesting shipments, finding rate quotes, and managing carriers.
Ability to track a shipment from the time it leaves the warehouse until the time it arrives at the consignee.
A document published by a carrier that describes charges for transportation between 2 or more points, and contains other terms and conditions governing the transportation activity.
Area in the warehouse that is used to accommodate the loading and unloading of trailers.
Type of man-up lift truck with a rotating fork that can turn 90 degrees in either direction.
To take individual items and ship them as a single larger item.
Otherwise known as a unitized load, a unit load is any arrangement of materials that are moved by material handling equipment, such as a lift truck, as a single unit (example: palletized loads).
Unit of measure (U/M)
The type of measurement unit used to track inventory such as pallets or eaches (individual units) in your system.
Necessary when working with multiple units of measures such as pallets and eaches. Requires a conversion such as eaches per pallet in order to make the load uniform.
Vertical numbers used in the storage rack for identification purposes.
Value is added to the distribution process when there is a contribution made to the functionality, value, or usefulness of a product.
Value Added Services
Extra services that a distribution center will perform in order to meet the needs of their customers. Typically refer to special assembly, packaging, or picking services.
In a 3PL, this describes the instance of a client (vendor) controlling the inventory at the 3PL warehouse. This type of inventory control can be managed in multiple ways including a periodic physical check of inventory by the vendor in order to determine what needs to be supplied to the warehouse. The vendor can also have remote access to the warehouse’s inventory control system (MRP) and order based on the levels of supply and demand visible electronically.
Receipt for product received into the warehouse.
Method of picking for multiple item orders where all zones are picked simultaneously and the product is sorted later. This method of picking is often used when picking shipments for specific carriers so that the product for each carrier is in the same place and can be sorted after it is picked.
WMS, Warehouse Management System
WMS is software designed to function around three main components: putaway, replenishment, and picking. By directing these three components, the system can logically manage the movement and storage of product in the warehouse.
Zones are locations in the warehouse where usage is determined by the characteristics of the product being stored such as special handling, or special inventory management requirements.
Method of order picking where the warehouse is divided into pick zones. Items are picked from each zone and then transferred on a conveyer system from one zone to the next.